Moving Your Pool Table

Some may think moving a pool table is as simple as taking off the legs are carrying it out the door. A pool table typically weights 600-900 lbs. Moving the table like this can damage crucial components of your pool table. We disassemble every single pool table we move, it is truly the only way to safely and securely move your pool table without incident.

A typical pool table move goes something like this;

1. Arrive at the pickup location fully disassemble the rail section and blanket wrap them.

2. Carefully remove each section of slate to your pool table and load each piece into our cargo van.

3. Unbolt the legs from the frame and load the rest of your pool table.

When we arrive to the drop off location we will consult with you on the best location to properly install your pool table so that you have the best playability all around the table.

4. Assemble and level the frame of your pool table.

5. Install and level the slate of your pool table, we glue the seams of the slate in two sections then finish it off with a thin layer of bees wax to make a seamless effect across all three sections of slate.

6. We then stretch your existing cloth of the slate bed and install the rails back to the surface of the slate.

7. Once last level check and you are ready to shoot pool on your new pool table.

 Check out our pricing FAQ to see how much your pool table move may cost.

Ask about our special rates for pool
table recovering when grouped with
another service.

If you have any questions please don't hesitate to give us a call at (443) 564-8922 or (410) 670-4646. Fill out the form to your right to receive a fast email response!